HP 16500C Programmer's Guide

Query :INTermodule:OUTPolar?
The OUTPolar query returns the current Port Out polarity setting.
Returned Format
[:INTermodule:OUTPolar] {1|0}<NL>
Example OUTPUT XXX;":INTERMODULE:OUTPolar?"
OUTType
Command :INTermodule:OUTType {{0|FEEDthru} | {1|LATChed}
| {2|PULse}}
The OUTType command sets the Port Out BNC signal type. This command
has the same effect as setting the Type field in the PORT IN/OUT Setup
menu under the Intermodule menu.
See Also The HP 16500C User’s Reference for more information about Port Out signal
types.
Example OUTPUT XXX;":INTERMODULE:OUTTYPE LATCHED"
Query :INTermodule:OUTType?
The OUTType query returns the current Port Out signal type.
Returned Format
[:INTermodule:OUTType] {0|1|2}<NL>
Example OUTPUT XXX;":INT:OUTT?"
INTermodule Subsystem
OUTType
13–11

HP 16500C Specifications

General

Brand	HP
Model	16500C
Category	Measuring Instruments
Language	English