HP 16500C Programmer's Guide

REName
Command :MMEMory:REName <name>[,<msus>],<new_name>
The REName command renames a file on the drive. The <name> parameter
specifies the filename to be changed and the <new_name> parameter
specifies the new filename. You cannot use REName to move a file from one
drive to the other.
You cannot rename a file to an already existing filename.
<name> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 64 alphanumeric characters for DOS in one of the following
forms:
NNNNNNNN.NNN when the file resides in the current directory or
\NAME_DIR\FILENAME when it does not reside in the current directory
<msus> Mass Storage Unit specifier. INTernal0 for the hard disk drive and
INTernal1 for the flexible disk drive.
<new name> A string of up to 10 alphanumeric characters for LIF in the following form:
NNNNNNNNNN
or
A string of up to 64 alphanumeric characters for DOS in one of the following
forms:
NNNNNNNN.NNN when the file resides in the current directory or
\NAME_DIR\FILENAME when it does not reside in the current directory
Example OUTPUT XXX;":MMEMORY:RENAME ’AUTOLOAD’,’OLD_AUTO’"
MMEMory Subsystem
REName
12–22

HP 16500C Specifications

General

Brand	HP
Model	16500C
Category	Measuring Instruments
Language	English