HP A6616 User Manual

Step4
Gently push the MIM (with the componen
Figure 4-32
Push the MIM into the slot
Step5
Fasten the captive screws clockwise with a Philips screwdriver.
Figure 4-33
Fasten the fastening screws
Step6
Turn on the power switch of the router if the router is powered off.
1)
After the MIM is initialized, the following information will be displayed on the configuration
terminal screen:
#Apr 26 15:35:28:493 2008
Trap
1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex
0.5, subslotIndex 0.5.1
%Apr 26 15:35:28:493 2008
SubCard is inserted in Frame 0 Slot 2 SubSlot 4, type is MIM
%Apr 26 15:35:29:162 2008
Slot 5/1 Plug In Successfully!
Press Enter
. The following message appears on the terminal screen:
System is busy with VIU configuration recovery, please wait a moment...
<HP>
This means the MIM has been successfully installed.
2)
If the router does not recognize the MIM or the MIM installation failed, the following information
appears on the terminal screen:
<HP>
%Apr 26 15:36:09:404 2008
Gently push the MIM (with the componen
ts facing left) into the MIM slot along the slide rails.
Push the MIM into the slot
Fasten the captive screws clockwise with a Philips screwdriver.
Fasten the fastening screws
Turn on the power switch of the router if the router is powered off.
After the MIM is initialized, the following information will be displayed on the configuration
#Apr 26 15:35:28:493 2008
HP DEV/1/SUB CARD INSERTED:
1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex
%Apr 26 15:35:28:493 2008
HP DEV/4/SUBCARD INSERTED:
SubCard is inserted in Frame 0 Slot 2 SubSlot 4, type is MIM
-
2GBE.
%Apr 26 15:35:29:162 2008
HP DR
VICOUT/1/DrvIcOutStr:Slot=5;(Src Slot[5])
Slot 5/1 Plug In Successfully!
. The following message appears on the terminal screen:
System is busy with VIU configuration recovery, please wait a moment...
This means the MIM has been successfully installed.
If the router does not recognize the MIM or the MIM installation failed, the following information
appears on the terminal screen:
%Apr 26 15:36:09:404 2008
HP
DRVICOUT/1/DrvIcOutStr:Slot=7;(Src Slot[7])
ts facing left) into the MIM slot along the slide rails.
After the MIM is initialized, the following information will be displayed on the configuration
1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex
2GBE.
VICOUT/1/DrvIcOutStr:Slot=5;(Src Slot[5])
System is busy with VIU configuration recovery, please wait a moment...
If the router does not recognize the MIM or the MIM installation failed, the following information
DRVICOUT/1/DrvIcOutStr:Slot=7;(Src Slot[7])

HP A6616 Specifications

General

Brand	HP
Model	A6616
Category	Network Router
Language	English