Regulatory Compliance Notices
Laser Devices
All HP systems equipped with a laser device comply with safety standards, including
International Electrotechnical Commission (IEC) 825. With specific regard to the
laser, the equipment complies with laser product performance standards set by
government agencies as a Class 1 laser product. The product does not emit hazardous
light; the beam is totally enclosed during all modes of customer operation and
maintenance.
Laser Safety Warnings
WARNING: To reduce the risk of exposure to hazardous radiation:
• Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the
laser device other than those specified herein.
• Allow only authorized service technicians to repair the laser device.
Compliance with CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration implemented regulations for laser products on August 2, 1976. These
regulations apply to laser products manufactured from August 1, 1976. Compliance is
mandatory for products marketed in the United States.
Compliance with International Regulations
All systems equipped with laser devices comply with appropriate safety standards
including IEC 825.
A-6 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Rob Weaver File Name: h-appa Regulatory Compliance Notices.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:30 PM
To Next Page
Loading...
Need help?
General