Component Identification
System Configuration Switch
CAUTION: Clearing nonvolatile RAM (NVRAM) deletes the system configuration.
Refer to Chapter 5, “Server Configuration and Utilities,” for instructions on
configuring the server.
Table 1-7: System Configuration Switch Settings
Position Default Description Status
1 Off Reserved —
2 Off Lock configuration Off = Configuration can be changed
On = Configuration is locked
3 Off Tower/rack configuration Off = Tower configuration
On = Rack configuration
4 Off Diskette boot Off = Server uses RBSU diskette boot
selection
On = User can override RBSU diskette boot
selection and boot from diskette
5 Off Password override Off = Password protection is active
On = User can override password
6 Off Clear CMOS and NVRAM Off = No function
On = Server configuration is erased at
power-up
7 Off Reserved —
8 Off Reserved —
Note: Switch positions 1, 7, and 8 are reserved for authorized service providers only.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 1-9
HP CONFIDENTIAL
Writer: Rob Weaver File Name: b-ch1 Component Identification.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:19 PM
To Next Page
Loading...
Need help?
General