B
Electrostatic Discharge
To prevent damage to the system, be aware of the precautions you need to follow
when setting up the system or handling parts. A discharge of static electricity from a
finger or other conductor may damage system boards or other static-sensitive
devices. This type of damage may reduce the life expectancy of the device.
To prevent electrostatic damage, observe the following precautions:
•
•
•
•
•
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free
workstations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be sure you are properly grounded when touching a
static-sensitive component or assembly.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide B-1
HP CONFIDENTIAL
Writer: Rob Weaver File Name: i-appb Electrostatic Discharge.doc
Codename: Flashback Part Number: 322383-001 Last Saved On: 2/11/03 1:33 PM
To Next Page
Loading...
Need help?
General