HP NonStop Pathway/iTS User Manual

ZPWY-MAP- Definitions
NonStop Pathway/iTS Management Programming Manual—426749-002
6-41
ZPWY-MAP-PAR-STATS-TCPTERM
ZPWY-MAP-PAR-STATS-TCPTERM
This token specifies whether the counters used for statistics measurements should be
set back to zero after returning the statistics data.
ZRESETSTATS
indicates whether to reset the statistics counters to zero. The following values are
possible:
If you do not assign a value to this field, the default is ZPWY-VAL-NO.
ZPWY-MAP-PAR-STATS-TERM
This token specifies whether the counters used for statistics measurements should be
set back to zero after returning the statistics data.
ZRESETSTATS
indicates whether to reset the statistics counters to zero. The following values are
possible:
If you do not assign a value to this field, the default is ZPWY-VAL-NO.
def ZPWY-DDL-PAR-STATS-TCPTERM.
02 ZRESETSTATS token-type ZPWY-DDL-YES-NO.
end.
ZPWY-VAL-NO Counters are not reset to 0.
ZPWY-VAL-YES Counters are reset to 0.
def ZPWY-DDL-PAR-STATS-TERM.
02 ZRESETSTATS token-type ZPWY-DDL-YES-NO.
end.
ZPWY-VAL-NO Counters are not reset to 0.
ZPWY-VAL-YES Counters are reset to 0.

HP NonStop Pathway/iTS Specifications

General

Brand	HP
Model	NonStop Pathway/iTS
Category	Software
Language	English