5. Push the magazine back into the device.
Figure 81 Removing a tape from the mailslot
.
Status/Information
The Status/Information menu provides access to the following status options:
• “Inventory (Status/Information > Inventory)” on page 109
• “Library information (Status/Information > Library Information)” on page 110
• “Drive information (Status/Information > Drive Information)” on page 111
• “Component status (Status/Information > Component Status)” on page 111
• “Network information (Status/Information > Network Information)” on page 112
To access the Status/Information menu:
1. From the Home screen, press Previous or Next until the screen displays Status/Information. Press
Enter to select.
2. Press Previous or Next until the screen displays your selected function. Press Enter to select.
Inventory (Status/Information > Inventory)
This option provides information on which slots have cartridges and which are empty. The second
line on the screen displays one of:
• Full (tapes without bar code labels)
• Bar code identification from the tape
• Empty
The device has the following inventory locations:
• Mailslot
• Left magazine
• Right magazine
• Drive 1
• Drive 2 (if two drives are present)
Each location provides different information:
• Drive or Mailslot: The screen display may read Mailslot AESO32L3, where AESO32L3 is an example
of the bar code number on the tape, or it may read Full or Empty.
• Left or right magazine: The screen display may read Left Magazine or Right Magazine. The second
line on the display indicates which slots have a tape or are empty. Slots in the left magazine are
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
guide 109
To Next Page
Loading...
Need help?
General