118
ip gateway
Syntax
ip gateway gateway-address
undo ip gateway
View
User view
Parameter
gateway-address: gateway address to be assigned to the switch.
Description
Use the ip gateway command to assign an gateway address to the switch.
Use the undo ip gateway command to remove the gateway address.
Example
# Assign an IP gateway to the switch.
<Command-Line> ip gateway 192.168.0.1
localuser
Syntax
localuser name password level
undo localuser name
View
User view
Parameter
name: Web user name, which ranges from 1 to 8.
password: Web user password, which ranges from 1 to 8.
level: Web user level, which ranges from 0 to 1.0 is guest, 1 is admin.
Description
Use the localuser command to configure a Web user for the switch.
Use the undo localuser command to remove the Web user.
Example
# Configure a Web admin user for the switch.
<Command-Line> localuser test test 1
management-vlan
Syntax
management-vlan vlan-id
undo management-vlan
To Next Page
Loading...
Need help?
General
