HP V1905 Series User Manual

76
Configuring SNMP
Simple Network Management Protocol (SNMP) provides a method for managing network devices. The
switch supports the following SNMP versions:
 SNMP version 1
 SNMP version 2c
The SNMP agents maintain a list of variables, which are used to manage the switch. The variables are
defined in the Management Information Base (MIB). The SNMP agent defines the MIB specification format,
as well as the format used to access the information over the network. Access rights to the SNMP agents are
controlled by access strings.
This section contains the following topics:
 Defining SNMP Communities
 Removing SNMP Communities
 Defining SNMP Traps
 Removing SNMP Traps
Defining SNMP Communities
Access rights are managed by defining communities in the SNMP Communities Setup Page. When the
community names are changed, access rights are also changed. SNMP communities are defined only for
SNMP v1 and SNMP v2c.
Click Administration  SNMP  Communities  Setup. The SNMP Communities Setup Page opens.
Figure 118 SNMP Communities Setup Page
The SNMP Communities Setup Page contains the following fields:

HP V1905 Series Specifications

General

Brand	HP
Model	V1905 Series
Category	Switch
Language	English