HP V1905 Series User Manual

67
Table 85 CoS to Queue Setup Page item description
Item Descri
p
tion
Restore Defaults Restores the switch factory defaults for mapping CoS values to forwarding queues.
Class of Service Specifies the CoS priority tag values, where 0 is the lowest and 7 is the highest.
Queue Defines the traffic forwarding queue to which the CoS priority is mapped.
Viewing CoS to Queue
The CoS to Queue Summary Page contains a table that displays the CoS values mapped to traffic queues.
Click Device  QoS  CoS to Queue. The CoS to Queue Summary Page opens.
Figure 106 CoS to Queue Summary Page
The CoS to Queue Summary Page contains the following fields:
Table 86 CoS to Queue Summary Page item description
Item Descri
p
tion
Class of Service Displays the CoS priority tag values, where 0 is the lowest and 7 is the highest.
Queue
Indicates the traffic forwarding queue to which the CoS priority is mapped. Four
traffic priority queues are supported.
Configuring DSCP to Queue
Defining DSCP to Queue
The DSCP to CoS Setup Page contains fields for mapping DSCP settings to CoS priority tag values. For
example, In default, a packet with a DSCP tag value of 3 can be assigned to queue 1.
Click Device  QoS  DSCP to Queue  Setup. The DSCP to Queue Setup Page opens.

HP V1905 Series Specifications

General

Brand	HP
Model	V1905 Series
Category	Switch
Language	English