HP V1905 Series User Manual

33
Item Descri
p
tion
Selected Ports Displays the PoE configuration for the selected ports.
Viewing PoE
The Port PoE Summary Page displays the switch and port PoE settings.
Click Port  PoE. The PoE Summary Page opens.
Figure 72 Port PoE Summary Page
The Port PoE Summary Page contains the following fields:
Table 58 Port PoE Summary Page item description
Item Descri
p
tion
Device
Power
Display
State
Indicates the power source status. The possible field values are:
 On: Indicates that the power supply unit is functioning.
 Off: Indicates that the power supply unit is not functioning.
 Faulty: Indicates that the power supply unit is functioning, but an error has
occurred. For example, a power overload or a short circuit.
Power
Max(watts)
Indicates the maximum amount of power the switch can supply. The field value is
displayed in Watts.
Power
Used(watts)
Indicates the actual amount of power currently used by the switch. The field value is
displayed in Watts.
Power
Free(watts)
Indicates the amount of additional power currently available to the switch. The field
value is displayed in Watts.
Ports
Power
Display
State
Indicates if the port is enabled to deliver power to powered devices. The possible
field values are:
 Enable: Indicates the switch is delivering power. This is the default.
 Disabled: Indicates the switch is not delivering power.
Mode
Indicates the port power mode. The possible field values are:
 Auto: Power is automatically allocated to the port, according to port number.
Lower numbered ports are assigned a higher priority for power delivery. This is
the default.

HP V1905 Series Specifications

General

Brand	HP
Model	V1905 Series
Category	Switch
Language	English