The Computer Setup (F10) Utility menu
The following table describes the functions available in the Computer Setup (F10) utility menu.
NOTE: With new BIOS releases, the following content is subject to change, so the menu might be
different than shown.
Table 4-1 Computer Setup (F10) Utility menu descriptions
Heading Option Description
File System
Information
Displays the following system characteristics:
ā
Product Name
ā
QPI Link Speed
ā
Memory Size
ā
Integrated MAC
ā
System BIOS
ā
Boot Block Date
ā
Chassis serial number
ā
Asset Tracking Number
ā
Management Module
ā
Processor Type
ā
Processor Speed
ā
Processor Stepping
ā
Cache Size
ā
DIMMs
About Displays copyright information.
System
Temperatures
Displays system temperatures and fan speeds.
Set Time and Date Lets you set system time and date.
Flash System
ROM
Lets you upgrade the BIOS from a ROM image on diskette, CD, or USB.
Replicated Setup Provides these options:
ā
Save to Removable MediaāSaves the workstation configuration, including
CMOS, in the qsetup.txt file. This file can be saved to a formatted, blank
1.44-MB diskette, or to a USB device.
ā
Restore from Removable MediaāRestores the workstation configuration
from a diskette or a USB device.
Default Setup Provides these options:
ā
Save Current Settings as DefaultāSaves the current settings as default
settings for the next operation.
ā
Restore Factory Settings as DefaultāRestores the factory settings as the
default settings for the next operation.
34 Chapter 4 System management ENWW