Settings 315
T-Mobile G2 User’s Guide
Wi-Fi networks
Displays a list of Wi-Fi networks you’ve previously configured and
those detected when the phone last scanned for Wi-Fi networks. See
“Connecting to Wi-Fi networks” on page 69.
Add Wi-Fi network
Opens a dialog where you can add a Wi-Fi network by entering its
SSID (the name it broadcasts) and security type. See “Connecting to
Wi-Fi networks” on page 69.
Advanced Wi-Fi settings screen
Regulatory domain
Set the number of channels to use.
Wi-Fi sleep policy
Opens a dialog where you can set whether and when the Wi-Fi radio
disconnects. Disabling sleep uses more battery power.
MAC address
The Media Access Control (MAC) address of your phone when
connecting to Wi-Fi networks.
IP settings
If you check Use static IP, you can use IP settings to enter an IP
address and other network settings for you phone manually, rather
than using the DHCP protocol to obtain network settings from the
W-Fi network itself.
Bluetooth settings screen
For details about working with these settings, see “Connecting to
Bluetooth devices” on page 72.
Bluetooth
Check to turn on Bluetooth so you can connect to Bluetooth devices.
Device name
Opens a dialog where you can give your phone a name that is visible
on some Bluetooth devices when you pair them. The current name is
displayed.
To Next Page
Loading...
Need help?
General
