Step 12 Connect the power cables. For details, see 5.7 PSU.
Step 13 Power on the server. For details, see 5.4.1 Powering On the Server.
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
TaiShan Rack Server iBMC User Guide
.
----End
5.20 Left Mounting Ear Plate
Removing the Left Mounting Ear Plate
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Power o the server. For details, see 5.4.2 Powering O the Server.
Step 3 Remove the power cables. For details, see 5.7 PSU.
Step 4 Remove the server. For details, see 5.4.4 Removing the Server and Guide Rails.
Step 5 Use a
at-head screwdriver to pry up the left mounting ear, hold the left
mounting ear, and gently pull it out. See (1) and (2) in Figure 5-90.
Step 6 Open the buckle of the mounting ear plate, and remove the left mounting ear
plate. See (3) and (4) in Figure 5-90.
Figure 5-90 Removing the left mounting ear plate
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 148