Figure 5-40 Installing a fan module
Step 8 Install the chassis cover. For details, see 5.8 Chassis Cover.
Step 9 Install the server. For details, see 5.4.3 Installing the Server on Guide Rails.
Step 10 Connect the power cables. For details, see 5.7 PSU.
Step 11 Power on the server. For details, see 5.4.1 Powering On the Server.
Step 12 Log in to the iBMC WebUI, and check whether the new component is normal. For
details, see the
TaiShan Rack Server iBMC User Guide
.
----End
5.11 Riser Module
This section uses the server with Kunpeng 920 7260, 5250, or 5230 processors as
an example to describe the internal structure of a server. The procedures for
removing and installing riser modules are the same for the server
congured with
Kunpeng 920 5220 or 3210 processors.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 109
To Next Page
Loading...
Need help?
General