SERVICE WORK ON THE ENGINE 18
131
401955-12
–
Remove filler plug
8
with the O-ring, and fill up with engine
oil.
Engine oil 1.2 l (1.3 qt.) Engine oil (SAE
10W/50)
( p. 148)
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and check it for leaks.
Finishing work
– Install the engine guard. ( p. 87)
– Check the engine oil level. ( p. 128)
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
F02360-10
Main work
–
Remove filler plug
1
with the O-ring.
–
Fill engine oil to the middle
A
of the level viewer.
Engine oil (SAE 10W/50) ( p. 148)
Info
In order to achieve optimal engine oil performance, it
is not advisable to mix different engine oils.
Husqvarna Motorcycles recommends changing the
engine oil.
– Mount and tighten the filler plug together with the O-ring.
To Next Page
Loading...
Need help?
General
