COMBINATION INSTRUMENT 7
31
Press the left
button for 3 –
5 seconds.
DST2 can be preset to a value between 0.0
and 39999.9 by pressing the buttons.
Press the
right button
briefly.
Next display mode
Press the
right button
for 3 – 5 sec-
onds.
DST2 is reset to 0.0.
7.10 AVG average speed, ART operating hours, and ODO total distance covered
401903-01
– Press one of the buttons until AVG, ART and ODO appear on
the combination instrument.
AVG shows the average speed since the last reset.
ART shows the operating hours.
ODO shows the total distance covered.
Press the left
button briefly.
Next display mode
Press the left
button for 3 –
5 seconds.
The OPEN END WRENCH SYMBOL shows
the remaining operating hours until the next
service is due.
Press the
right button
briefly.
Next display mode
Press the
right button
for 3 – 5 sec-
onds.
AVG is reset to 0.0.
To Next Page
Loading...
Need help?
General
