1
CONTROLS AND EQUIPMENT
54
B340C03FC-EAT
Lighting Switch
The vehicle sidelights and headlights
are operated by rotating the end of the
turn signal switch barrel. To operate the
parking lights, rotating the switch to the
first detent with ignition switch at the
"OFF" position will cause the lights to
illuminate. To operate the headlights,
the turn signal switch barrel should be
rotated to the second detent. The head-
lights will only operate when the ignition
switch is at the "ON" position. If the
ignition switch is turned to the "OFF"
position, only the parking lights will function.
NOTE:
The ignition must be in the "ON"
position to turn on the headlights.
MULTI-FUNCTION SWITCH
SB220A1-E
Turn Signal Operation
To signal an intention to turn right, the
switch lever should be pressed down.
To signal an intention to turn left, the
switch lever should be pushed upwards.
In both instances, the turn signal lights
the instrument cluster warning light will
flash. Upon completion of the manoeu-
vre, the lever will, under normal circum-
stances, return to the "OFF" position.
However, if the manoeuvre involved
only a small movement of the steering
wheel, the signal may need to be can-
celled manually. If either turn signal
indicator flashes more rapidly than nor-
mal or refuses to flash at all, a malfunc-
tion of the turn signal system may
exist.
SB220B1-E
Lane Change Signal
To indicate an intention to change lanes,
moving the lever slightly towards the
direction of the relevant turn signal will
cause the turn signal lights to flash.
When the lever is released, it will return
to the "OFF" position.
B340B01FC-D
B340C01FC-D
fcuk-1.p65 12/27/2006, 10:12 AM54
To Next Page
Loading...
Need help?
General
