1
FEATURES OF YOUR HYUNDAI
23
B160B01A-AAT
Periodic Inspection
It is recommended that all seat belts
be inspected periodically for wear or
damage of any kind. Parts of the sys-
tem that are damaged should be re-
placed as soon as possible.
B160A01A-AAT
CARE OF SEAT BELTS
Seat belt systems should never be
disassembled or modified. In addition,
care should be taken to assure that
seat belts and belt hardware are not
damaged by seat hinges, doors or
other abuse.
!
WARNING:
When you return the rear seatback
to its upright position after the rear
seatback was folded down, be care-
ful not to damage the seat belt web-
bing or buckle. Be sure that the
webbing or buckle does not get
caught or pinched in the rear seat.
You can adjust the height of the shoul-
der belt anchor to one of 4 positions for
maximum comfort and safety.
If the height of the adjusting seat belt is
too near your neck, you will not be
getting the most effective protection.
The shoulder portion should be ad-
justed so that it lies across your chest
and midway over your shoulder near-
est the door and not your neck.
B170A01E
B170A04A-AAT
HEIGHT ADJUSTABLE FRONT
SEAT SHOULDER BELT
(If Installed)
B160D01A-AAT
When to Replace Seat Belts
Entire in-use seat belt assembly or
assemblies should be replaced if the
vehicle has been involved in an acci-
dent. This should be done even if no
damage is visible. Additional ques-
tions concerning seat belt operation
should be directed to your Hyundai
Dealer.
B160C01A-AAT
Keep Belts Clean and Dry
Seat belts should be kept clean and
dry. If belts become dirty, they can be
cleaned by using a mild soap solution
and warm water. Bleach, dye, strong
detergents or abrasives should not be
used because they may damage and
weaken the fabric.
To Next Page
Loading...
Need help?
General
