CardAgent Utility
Appendix B. Advanced Information for PC Cards B-15
5 Enter the necessary values, validate the configuration values,
and save the configuration as you would normally do when you
are configuring cards.
6 If the card that you are trying to configure requires (per the card
manufacturer's instructions) resources that are in use by another
PCMCIA card or application, then you must remove that card
from the slot, or close the application in question, and retry
configuring the card.
Understanding Event-Triggered Associations
To setup or modify an association with a PC Card do the following:
1 Insert into a socket the card for which you want to create or
modify an association.
2 From the CardAgent main window, click on the appropriate slot
number that contains the card you just inserted, and then click
on the Associations button.
3 If you want to modify an existing association, highlight that
association from the resulting Association list and click on Edit
Info.
4 If you want to create a new association, click on New.
Note:
If you specify Time-Triggered as the
event, the only available action is
Launching a Program.
5 For the associated Event, click on the down arrow to the right of
the Event field and highlight the appropriate event in the
subsequent pull down menu. These are the events that you can
choose:
− Card Insertion
− Card Insertion Failure
− Card Extraction
− Power Management Suspend
− Power Management Resume
− Time Triggered
To Next Page
Loading...
Need help?
General