Icom IC-440N User Manual

29
6
SCAN
6
Scanning preparation ■
IC-440N scans all tagged channels when a scan is activat-
ed. When the IC-440N fi nds a busy channel, it can be set to
pause or resume after a pause (Scan Stop Timer). (Excluding
repeater search scan).
(See Scan Stop Timer in Set mode. The default setting is
P5).
Scan type selection D
➥ Push
O࡮G࡮P
RS
(Scan Mode) several times to select the desired
scan type.
• Open, Group and Priority scans are available.
• “ ”, “ ” or “ ” is displayed for 0.5 seconds when each scan
type is selected.
Open scan is selected.
Group scan is selected.
Priority scan is selected.
Push
Push
Push
Appears
Appears
Appears
O࡮G࡮P
RS
O࡮G࡮P
RS
O࡮G࡮P
RS
Tag channel setting D
Select the desired scan type. (See to the left.) q
Select the desired channel. (p. 14) w
Hold down e
SCAN
TAG
(Scan Tag) for 2 seconds to toggle the Tag
channel setting ON and OFF.
• “ ” appears when the tag setting is ON (The channel is set as
a scan channel).
Appears
To speed up scanning:
For Open scan, cancel the Tag channel setting to skip undesired
channels such as usually busy channels.
For Group scan, set only often-used channels as tag channels.
All memory channels may be set as tag channels by default.

Icom IC-440N Specifications

General

Brand	Icom
Model	IC-440N
Category	Transceiver
Language	English