31
6
SCAN
6
Group and Priority scan ■
Group and Priority scans repeatedly look for signal on the Pri-
ority channel while scanning specifi ed channels. This is use-
ful when waiting for a call on the Priority channel or several
specifi ed channels.
Group and Priority scans behave differently when transmit-
ting. Group scan can transmit on a Priority channel or busy
channel, and Priority scan can transmit on only a Priority
channel.
Push q
OGP
RS
(Scan Mode) several times to select the Group
or Priority scan. (p. 29)
• “ ” appears when the Group scan is selected, and “ ”
appears when the Priority scan is selected.
Group scan is selected.
Appears
Appears
Priority scan is selected.
When the priority scan type is selected in step wq, set the
Priority channel if desired. (p. 17)
• When the Priority channel is not set, scan start channel is moni-
tored during the Priority scan.
Appears
e Push
SCAN
TAG
(Scan) to start the scan.
Blinks
Scan start channel
Blinks
Priority channel
Group scan starts.
Priority scan starts.
r When receiving a signal, the scan pauses and resumes,
according to the selected Scan resume mode. (p. 30)
t Push
SCAN
TAG
(Scan) to cancel the scan.
To Next Page
Loading...
Need help?
General
