102
11 MENU SCREEN OPERATION
■ Sounds set mode items
DD
Beep output level
Adjusts the key-touch beep tone level to the desired level
within 39 levels.
The key-touch beep
(below item) must be set to ON to have
a beep tone.
DD
Key-touch beep
Turns the key-touch beep ON or OFF. (default: ON)
DD
Scan stop beep
Turns the scan stop beep function ON or OFF.
(default: OFF)
DD
Scope audio output
Select the audio output function capability during sweep with
band scope function.
• ON : The received audio sounds during sweep.
(de-
fault)
• OFF : No audio sounds during sweep.
DD
Volume select
Select the volume level adjustment from Both and Separate.
• BOTH : Both A and B bands volume level is ad-
justed with [VOL] at the same time.
(default)
• SEPARATE : The Volume setting is adjusted indepen-
dently in A and B bands with [VOL].
To Next Page
Loading...
Need help?
General
