Icom IC-91AD User Manual

70
8 MEMORY/CALL CHANNELS
[EXAMPLE]: Programming the bank name “AIR” into the
scan edge channel 01A.
■ Selecting memory/bank name
indication
During memory mode operation, one of the programmed
memory name or bank name can be displayed below the fre-
quency indication.
NOTE: The programmed scan name is displayed during
the programmed scan edge channel selection.
qPush [MR/S.MW] to select memory mode.
wWhile pushing [6 M.N], rotate [DIAL] to select display indi-
cation type from bank name, memory name and OFF.
A
AIR
µ
FMFM
127 500
03A
A
Airport1
µ
FMFM
127 500
03A
A
µ
FMFM
127 500
03A
[DIAL]
Name indication OFF.
Memory name indication
Bank name indication
127 500
BANKBANK :A-01:A-01
BNAME: BNAME:
MNAME:MNAME:
SNAME:SNAME:
AMAM
r
µ
03A
A
µ
AMAM
127 500
03A
A
µ
FMFM
145 870
011
127 500
BANKBANK :A-01:A-01
BNAME:AIR BNAME:AIR
MNAME:MNAME:
SNAME:SNAME:
AMAM
r
µ
03A
127 500
BANKBANK :A-01:A-01
BNAME:AI BNAME:AI
MNAME:MNAME:
SNAME:SNAME:
AMAM
r
µ
03A
127 500
BANKBANK :A-01:A-01
BNAME:A BNAME:A
MNAME:MNAME:
SNAME:SNAME:
AMAM
r
µ
03A
Enter select memory
write mode.
Push
for 1 sec.
Push and hold
for 1 sec. to program.
Push
to select memory mode.
Rotate [DIAL] to select
scan edge channel 03A.
Push
to select BNAME *.
or
Scan edge channel 03A
Rotate [DIAL] to enter
A , push .
Enter I and R
with [DIAL] and .
*Select
when programming the mem-
ory name or the scan name,
respectively.

Icom IC-91AD Specifications

General

Brand	Icom
Model	IC-91AD
Category	Transceiver
Language	English