92
11 MENU SCREEN OPERATION
■ DV set mode items
The following items are selectable by the IC-91AD or optional
UT-121 is installed into the IC-91A.
DD
Auto reply
This function replies to an individual station call even you are
away from the transceiver.
After the manual transmission (pushing [PTT]), the Auto
Reply setting returns to OFF automatically.
• OFF : No reply is performed even a call is received.
(default)
• ON : Sets caller’s call sign and reply to the call with
the set own call sign automatically.
• VOICE : Sets caller’s call sign and reply to the call with
the recorded audio in REPLY VOICE memory of
DV VOICE MEMO.
DD
Digital code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available. (default: 00)
DD
DV data TX
During slow-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
(default: PTT)
DD
Digital monitor
Sets the desired monitoring mode during digital mode opera-
tion from “Auto,” “Digital” and “Analog.”
• AUTO : The transceiver selects monitoring mode from
FM and DV according to the received signal.
(default)
• DIGITAL : Monitors in DV mode.
• ANALOG : Monitors in FM mode.
To Next Page
Loading...
Need help?
General
