62
7 DV MODE OPERATION (Optional UT-121 is required for IC-91A)
■ Other functions for DV mode operation
DD
DV voice memory
The IC-91A/91AD has a DV voice memory that records a total
30 second
(approx.) of received audio.
The DV voice memory is divided into 2 tracks, 15 seconds
each in a track, with the default setting.
◆ Recording received audio
qWhile receiving a DV signal, push [REC/MODE].
wRotate [DIAL] to select the desired track.
•“✱” is displayed beside the track number when the selected track
has been recorded.
ePush [REC/MODE] to start recording.
• Track counter (bar meter) is displayed during record.
• The recording is paused automatically when the DV signal is in-
terrupted or when DV audio synchronous signal cannot be re-
ceived correctly. Re-starts the recording when DV audio
synchronous signal is received correctly.
rPush [REC/MODE] again to stop recording.
• The recording is stops automatically even the track becomes full.
◆ Track size setting
The track size can be changed with the following instruction.
qEnter “TRACK SIZE” in DV voice memo set mode.
• TRACK SIZE screen is displayed
wRotate [DIAL]
†
to select the desired track size.
10S/3TRACK : Makes 3 tracks and 10 second audio can
be recorded in each track.
15S/2TRACK : Makes 2 tracks and 15 second audio can
be recorded in each track.
30S/1TRACK : Makes 1 track only and 30 second audio
can be recorded in a track.
ePush [5/SKIP](ï) to set the track size and return to DV
VOICE MEMO screen.
rPush [MENU/LOCK] to return to frequency indication.
To Next Page
Loading...
Need help?
General
