73
8
MEMORY/CALL CHANNELS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Erasing/transferring bank contents
The bank contents of programmed memory channels can be
cleared or reassigned to another memory bank.
INFORMATION: Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
qSelect the desired bank contents to be transferred or
erased from the bank. (p. ??)
➥ Push [MR/S.MW] several times to select memory bank
mode.
➥ While pushing [BAND], rotate [DIAL] to select the de-
sired memory bank group.
➥ Rotate [DIAL] to select the bank channel.
wPush [MR/S.MW] for 1 sec. to enter select memory write
mode.
• 1 short and 1 long beeps sound.
• Displays the original memory channel number automatically and
“
µµ
” indicator blinks.
• Do not hold [MR/S.MW] for more than 2 sec., otherwise the
memory contents will be copied to VFO.
ePush [2/SCAN](
∫∫
) or [8/TS](
√√
) to select “BANK.”
rPush [6/M.N](
≈≈
) or [4/DUP](
ΩΩ
) several times to select the
desired bank group to be transferred.
• Select “– – – –” indication when erasing the contents from the
bank.
tRotate [DIAL] to select the desired bank channel.
• Skip this step when “––––” indication is selected in step r.
yPush [MR/S.MW] for 1 sec. to erase/transfer the bank con-
tents.
To Next Page
Loading...
Need help?
General
