20
4
BASIC OPERATION
■ Mode selection
DVFO mode
VFO mode is used for setting a desired
frequency within the band range.
➥ Push [VFO] to select VFO mode.
• Pushing [VFO] in VFO mode toggles
VFO A and B.
What is VFO?
VFO is an abbreviation of Variable Fre-
quency Oscillator. Frequencies for
transmitting and receiving are gener-
ated and controlled by the VFO.
DMemory mode
Memory mode is used for operation of
memory channels which have pro-
grammed frequencies.
➥ Push [MR] to select memory mode.
• Pushing [MR] in memory mode toggles
memory channel and memory bank indi-
cations.
•To program a memory Ch, refer to p. 37.
DCall/TV channels
Call channels are used for most-often-
used frequencies for quick recall. TV
channels* can be selected with
[CALL/TV].
➥ Push [CALL/TV] to select a call, TV
channel* in sequence.
*Depends on version.
To Next Page
Loading...
