55
8
SET MODE
■ Set mode
Set mode is used for programming in-
frequently changed values or conditions
of functions.
In addition, this transceiver has 2 ex-
panded set modes which are used for
programming more infrequently
changed values or conditions of func-
tions. When turning the expanded set
modes OFF, only half of the set mode
items are displayed for simple opera-
tion.
DEntering set mode
q Push [8 SET] for 1 sec. to enter set
mode.
w Rotate [DIAL] until the desired item
appears.
e Push [8 SET] to select the set mode
item.
r Rotate [DIAL] to select a set mode
item.
t Push [VFO] to exit set mode or push
[8 SET] then rotate [DIAL] to select
another set mode item.
DExpanded set mode ON/OFF
q Push [8 SET] for 1 sec. to enter set
mode.
w Rotate [DIAL] until “EXP1” or “EXP2”
appears.
e Push [8 SET] to select an expanded
set mode.
r Rotate [DIAL] to turn the expanded
set mode ON or OFF.
t Push [8 SET] then rotate [DIAL] to
select a set mode item in the ex-
panded set mode, or push [VFO] to
exit set mode.
To Next Page
Loading...
