Inovance MD310 T2.2B User Manual

5 Parameter Table
- 35 -
■
Group F8: Auxiliary Functions
Para� No� Para� Name Setting Range Unit Default Commission
F8-00 JOG running frequency 0�00 to max frequency Hz 2�00
F8-01 JOG acceleration time 0�0 to 6500�0 s 20�0
F8-02 JOG deceleration time 0�0 to 6500�0 s 20�0
F8-03 Acceleration time 2 0�0 to 6500�0 s Model
dependent
F8-04 Deceleration time 2 0�0 to 6500�0 s Model
dependent
F8-05 Acceleration time 3 0�0 to 6500�0 s Model
dependent
F8-06 Deceleration time 3 0�0 to 6500�0 s Model
dependent
F8-07 Acceleration time 4 0�0 to 500�0 s Model
dependent
F8-08 Deceleration time 4 0�0 to 6500�0 s Model
dependent
F8-09 Frequency jump 1 0�00 to max frequency Hz 0�00
F8-10 Frequency jump 2 0�00 to max frequency Hz 0�00
F8-11 Frequency jump amplitude 0�00 to max frequency Hz 0�00
F8-12 Forward/Reverse rotation
dead-zone time
0�0 to 3000�0 s 0�0
F8-13 Reverse control 0: Enabled
1: Disabled
N�A� 0
F8-14 Running mode when set
frequency lower than
frequency lower limit
0: Run at frequency lower limit
1: Stop
2: Run at zero speed
N�A� 0
F8-15 Droop control 0�00 to 10�00 Hz 0�00
F8-16 Accumulative power-on time
threshold
0 to 65000 h 0
F8-17 Accumulative running time
threshold
0 to 65000 h 0
F8-18 Startup protection 0: No
1: Yes
N�A� 0
F8-19 Frequency detection value
(FDT1)
0�00 to max frequency Hz 50�00
F8-20 Frequency detection
hysteresis (FDT1 hysteresis)
0�0 to 100�0 (FDT1 level) % 5�0
F8-21 Detection range of frequency
reached
0�00 to 100 (max frequency) % 0�0
F8-22 Jump frequency during
acceleration/deceleration
0: Disabled
1: Enabled
N�A� 1
F8-25 Frequency switchover point
between acceleration time 1
and acceleration time 2
0�00 to max frequency Hz 0�00
F8-26 Frequency switchover point
between deceleration time 1
and deceleration time 2
0�00 to max frequency Hz 0�00
F8-27 Terminal JOG priority 0: Disabled
1: Enabled
N�A� 0

Inovance MD310 T2.2B Specifications

General

Rated Power	2.2 kW
Control Mode	V/F control, Sensorless vector control (SVC)
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short circuit
Communication Interface	Modbus RTU
Humidity	5% to 95% (non-condensing)
Altitude	Below 1000m (derating above 1000m)
Operating Temperature	-10°C to +40°C (derating above 40°C)