To Next Page

To Previous Page

Using AptusNX

9.8.2 iARM Upgrade

No. Item Description

iARM Upgrade Upgrades the rmware of iARM module.

New iARM

Firmware

Browse and select the iARM rmware le to upload and click Start Upload

button. The update may take a few minutes to complete. The upload time may

vary due to a variety of factors such as the speeds of your network. Uploading

an incorrect rmware le may cause serious damage to your antenna and ACU.

Check the rmware version before uploading rmware.

NOTE: refer to the following "iARM Upgrade Procedures" page for more

details.

Bootstrap/

Bootloader

Displays current bootstrap and bootloader version.

• Bootstrap: displays the Bootstrap Version (Main, Factory Default).

• Bootloader: displays the Bootloader Version (Main, Factory Default, Active

Bootloader)

Kernel/File

System

The ACU has three storage parts the Sys0, the Sys1 and the Factory Default.

Selects the desired storage part and click the Activate button. Then perform

the"9.8.3 iARM Save & Reboot" on page 67 to apply the settings to the

system.

• Sys0: displays the Sys0 version.

• Sys1: displays the Sys1 version.

• Factory Default: displays the Factory Default version.

The Current Active displays activated storage part Information.

• Current Active

- Current Package: displays the activated storage part's name (Sys0, Sys1

or Factory Default).

- Kernel, File System: displays the activated storage part's le version.

v1.00

Intellian v60E User Manual

Questions and Answers: