xGen Installation & Programming Guide 85
Example
For example, you could create a 24/7 schedule and then have this schedule
follow an action. Next assign a keypad permission this schedule. Now based on
what the action does, we can conditionally enable or disable a keypad. This
provides a high level of flexibility and multiple sets of rules using actions can be
set up like this.
Programming Instructions for Arm-Disarm
Goal
Automatically Arm and Disarm your xGen system.
Pre-conditions
Partitions have been programmed.
Notes
The Arm-Disarm will function as if it is the user you select. You will need to
program valid user permissions including Partition Groups, User Schedule,
Profile levels, and active date and time.
Creating a new user only for the purpose of Arm-Disarm will make it easier to
maintain.
Use presets for Schedules, Partition Groups and Permissions for faster
programming.
xGen will sound a warning prior to the Arm-Disarm from arming a Partition. This
is set in Partitions – Partition Timers – Partition Type Delay.
If a user with Partition Type Override option disarms a Partition with Arm-Disarm,
then the Arm-Disarm will no longer function on that Partition. To re-enable Arm-
Disam that Partition must be manually armed.
To Next Page
Loading...
Need help?
General
