To Next Page

To Previous Page

Inspection and Installation

2 Inspection and Installation

♦ Verifying the Shipment

♦ Instrument Size Introduction

♦ Connecting the Power Cord

♦ Connecting the Device Under Test (DUT)

♦ Remote Interface Connection

2.1 Verifying the Shipment

Unpack the box and check the contents before operating the instrument. If

wrong items have been delivered, if items are missing, or if there is a defect with

the appearance of the items, contact the dealer from which you purchased the

instrument immediately.

The package contents include:

Item

Qty.

Model Remarks

Regenerative DC

Electronic Load

x1 IT8000 Series For the specific models in-

cluded in this series, refer

to 1.1 Brief Introduction.

Power cord x1 - Depending on the instru-

ment model.

The power cord is

adapted to the power out-

let specifications in this

area. For details, see 2.3

Connecting the Power

Cord.

USB communication

cable

x1 - This accessory is se-

lected when the USB in-

terface is used for starting

up remote operation.

CD x1 - It contains User Manual,

Programming Guide and

other user

documentations.

ITech IT8000 Series User Manual

Other manuals for ITech IT8000 Series