ITech IT8000 Series User Manual

Quick Reference
1.8 System Menu Function
This Chapter offers a general introduction of system menus, allowing users to
have a preliminary understanding of system functions of this IT8000 series.
The steps of the system menu function are as follows:
1. Press the composite keys [Shift]+[P-set] (System) on the front panel to en-
ter the system menu.
At this point, the VFD screen displays the system menu items. Each menu
item has a numbering identifier. The user can press Up and Down buttons or
use the knob for scrolling display of other menu items.
2. Press [Enter] on a menu interface to enter the setting interface.
3. After the menu items are set, press [Enter] again to save the modified
contents.
You can press [Esc] to return to the previous menu.
The description of the menu items is shown in the table below.
Beep Set the beeper state.
On
Turn the beeper on.
Off
Turn the beeper off.
PowerOn
Set the power-on state.
Reset
When the instrument is powered on, the instrument will in-
itialize some settings and [On/Off] state.
Last
When the instrument is powered on, the instrument will re-
main the same settings and [On/Off] state as last time
you turned off the instrument.
Last+Off
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
strument, but the [On/Off] is OFF state.
Sense Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
ListTrig Source Set the trigger method for the List files running.
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
Copyright © Itech Electronic Co., Ltd.
11

ITech IT8000 Series Specifications

General

Brand	ITech
Model	IT8000 Series
Category	Test Equipment
Language	English