ITech IT8512A+ Programming Guide

Status Commands
Copyright © ITECH Electronic Co., Ltd. 19
Command Syntax
STATus:QUEStionable:ENABle <NRf+>
Parameters
0 to 32767
Examples
STAT:QUES:ENAB 32
Query Syntax
STATus:QUEStionable:ENABle?
Returned Parameters
<NR1>
STATus:QUEStionable:ENABle?
This command is used to query the value of enable register.
Command Syntax
STATus:QUEStionable:ENABle?
Parameters
None
Returned Parameters
<NR1>
STATus:OPERation[:EVENt]?
This command query the query operation event register values. The event
register is read-only register, which holds (latches) all value passed by the NTR
and, or PTR filter. Read channel operation event register will clear it.
Query Syntax
STATus:OPERation[:EVENt]?
Parameters
None
Examples
STAT:OPER:EVEN?
Returned Parameters
<NR1>
Related Commands
*CLS

ITech IT8512A+ Specifications

General

Brand	ITech
Model	IT8512A+
Category	Test Equipment
Language	English