ITech IT8512A+ Programming Guide

Measure Commands
Copyright © ITECH Electronic Co., Ltd. 46
Examples
MEAS:CURR:MAX?
Returned Parameters
<NR2>
MEASure[:SCALar]:CURRent:MINimum?
This command is used to query the minimum current of the electronic load.
Command Syntax
MEASure[:SCALar]:CURRent:MINimum?
Parameters
None
Examples
MEAS:CURR:MIN?
Returned Parameters
<NR2>
MEASure[:SCALar]:CURRent:PTPeak?
This command is used to query the current peak-to-peak value.
Command Syntax
MEASure[:SCALar]:CURRent:PTPeak?
Parameters
None
Examples
MEAS:CURR:PTP?
Returned Parameters
<NR2>
MEASure[:SCALar]:POWer[:DC]?
This command is used to query the power average.
Command Syntax
MEASure [:SCALar]:POWer[:DC]?
Parameters
None

ITech IT8512A+ Specifications

General

Brand	ITech
Model	IT8512A+
Category	Test Equipment
Language	English