ITech IT8512A+ Programming Guide

Voltage Rise/Fall Time Test
Copyright © ITECH Electronic Co., Ltd. 56
Chapter9 Voltage Rise/Fall Time Test
TIME:VOLTage:LOW <Voltage>
This command is used to set the start rising voltage value of the load when
measuring the rise time of voltage output.
Command Syntax
TIME:VOLTage:LOW <Voltage>
Parameters
0 through MAX|MINimum|MAXimum|DEFault
Unit
V
Returned Parameters
MINimum
Query Syntax
TIME:VOLTage:LOW?
TIME:VOLTage:LOW?
This command is used to query the start rising voltage value.
Command Syntax
TIME:VOLTage:LOW?
Parameters
None
Returned Parameters
<NRf>
TIME:VOLTage:HIGH <Voltage>
This command is used to set the starting drop voltage value of the load
when measuring the fall time of voltage output.
Command Syntax
TIME:VOLTage:HIGH <Voltage>
Parameters
0 through MAX|MINimum|MAXimum|DEFault

ITech IT8512A+ Specifications

General

Brand	ITech
Model	IT8512A+
Category	Test Equipment
Language	English