ITech IT8512A+ Programming Guide

Input Settings
Copyright © ITECH Electronic Co., Ltd. 38
Parameters
MIN~MAX|MINimum|MAXimum
Unit
S
*RST Value
MIN
Examples
DYN:HIGH:DWELl 0.01
Query Syntax
[SOURce:]DYNamic:HIGH:DWELl?
Returned Parameters
<NR2>
[SOURce:]DYNamic:HIGH:DWELl?
This command is used to query the duration of high-level load current in
dynamic mode.
Command Syntax
[SOURce:]DYNamic:HIGH:DWELl?
Parameters
None
Unit
S
*RST Value
MIN
[SOURce:]DYNamic:LOW[:LEVel] <NRf+>
This command is used to set the low-level load current in dynamic mode.
Command Syntax
[SOURce:]DYNamic:LOW[:LEVel] <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
A

ITech IT8512A+ Specifications

General

Brand	ITech
Model	IT8512A+
Category	Test Equipment
Language	English