ITech IT8731 Programming Guide

System Commands
Copyright © Itech Electronic Co., Ltd. 35
Chapter4 System Commands
System commands control the system-level functions of the electronic load that
are not directly related to input control or measurement functions.
SYSTem:PRESet
This command returns the instrument to states optimized for front panel
operation.
Command Syntax
SYSTem:PRESet
Parameters
None
SYSTem:POSetup
This command is used to select the power-on defaults. With RST selected, the
instrument powers up to the *RST default conditions. With the SAV0 parameter
selected, the instrument powers-on to the setup that is saved in the specified
location using the *SAV command.
Command Syntax
SYSTem:POSetup <CRD>
Parameters
RST | SAV0
*RST Value
RST
Examples
SYST:POS RST
Query Syntax
SYSTem:POSetup?
Returned Parameters
<CRD>

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English