ITech IT8731 Programming Guide

STATus Subsystem
Copyright © Itech Electronic Co., Ltd. 40
Examples
STAT:CHAN:COND?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:CHAN?
STATus:CHANnel:ENABle
Channel Specific
This command sets or reads the value of the Channel Enable register for a
specific channel. The particular channel must first be selected by the CHAN
command.
Command Syntax
STATus:CHANnel:ENABle <NR1>
Parameters
0 to 65535
Examples
STAT:CHAN:ENAB 3
Query Syntax
STATus:CHANnel:ENABle?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:CSUM?
This query returns the value of the Channel Event summary register. The bits in
this register correspond to a summary of the channel register for each input
channel. Reading the Channel Event summary register clears it. This command
is not channel specific, it applies to the entire mainframe.

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English