ITech IT8731 Programming Guide

STATus Subsystem
Copyright © Itech Electronic Co., Ltd. 44
Related Commands
*CLS
STATus:QUEStionable:CONDition?
This query returns the value of the Questionable Condition register. That is a
read-only register that holds the real-time (unlatched) questionable status of the
electronic load. This command is not channel specific, it applies to the entire
mainframe.
Query Syntax
STATus:QUEStionable:CONDition?
Parameters
None
Examples
STAT:QUES:COND?
Returned Parameters
<NR1> (register value)
Related Commands
STAT:OPER:COND?
STATus:QUEStionable:ENABle
This command sets or reads the value of the Questionable Enable register.
This register is a mask for enabling specific bits from the Questionable Event
register to set the questionable summary (QUES) bit of the Status Byte register.
This bit (bit 3) is the logical OR of all the Questionable Event register bits that
are enabled by the Questionable Status Enable register. This command is not
channel specific, it applies to the entire mainframe.
Command Syntax
STATus:QUEStionable:ENABle <NR1>
Parameters
0 to 65535
Default Value
0

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English