Name: JUKI KE-1070
Brand: JUKI
Rating: 4 (1 reviews)

To Next Page

High-Speed Chip Shooter

KE-1070/1070C/2070C/2070

High-Speed Flexible Mounter

KE-1080/2080/2080R

MAINTENANCE GUIDE

Contact info@goldlandsmt.com for PA

T II

T I

CUSTOMER SUPPORT DEPARTMENT

Table of Contents3
X-Y Unit11
Replacing the Timing Belt and Adjusting the Belt Tension11
Timing Belt XM11
Timing Belt XB13
Timing Belt YM16
Timing Belt YB17
Replacing the Pulleys20
Replacing the Pulley XA20
Replacing the Pulley XM (X-Motor Assembly)20
Replacing the Pulley YA20
Replacing the Pulley YM (Y-Motor Assembly)20
Replacing the Pulley YB20
Replacing the Servomotors21
Replacing the X-Motor21
Replacing the Y-Motor21
Replacing the Magnescale22
Magnescale Affixing Position22
Clearance of the Magnescale24
Clearance between the Sensor Head and the Y-Axis Linear Way (for Y-Axis Only)26
Replacing the Limit Sensor and the X-Axis Home Proximity Sensor27
Replacing the X-Axis Limit Sensor and the X-Axis Home Proximity Sensor27
Replacing the Y-Axis Limit Sensor and the Y-Axis Home Proximity Sensor28
Replacing the Home Position Sensor30
X-Axis30
Y-Axis30
Replacing the Plastic Rail31
Replacing the Cables in the X/Y Veyor-Cable33
Removing the X Cable33
Checking the Cable Marking (X)35
Assembling the Cable36
Separating the Fusion-Bonded Parts of the Cables38
Removing the y Veyor-Cable39
Placing Marks on the y Veyor-Cable39
Assembling the Cables40
Replacing the Cables in the X/Y Veyor-Cable (KE-2080R)46
Removing the X Cable46
Checking the Cable Marking (X)49
Assembling the Cable51
Separating the Fusion-Bonded Parts of the Cables53
Removing the y Veyor-Cable54
Placing Marks on the y Veyor-Cable54
Assembling the Cables55
Wiring Around the Head60
Head Unit61
Replacing and Adjusting the Head61
LNC Head61
IC Head (KE-1080/2080)63
IC Head (KE-2080R)64
Replacing the Motor65
Z-Motor (LNC Head)65
Motor (LNC Head)67
Z-Motor (IC Head)68
Motor (IC Head: KE-1080/2080)70
Motor (IC Head: KE-2080R)71
Replacing the Z-Sensor72
LNC Head72
IC Head73
Replacing the T-Sensor (KE-2080R)74
Replacing the Laser Sensor75
Replacing the LNC75
Replacing the Point Sensor (KE-1080/2080)76
Replacing the FMLA (KE-2080R)78
Replacing the Head up Cylinder80
Replacing the Belts81
LNC Head81
IC Head82
Replacing the Z-Slide Shaft84
List of Readjustment Items after Replacement85
Parts Around the Head86
Replacing the Ejector Unit86
Replacing the Bad Mark Sensor87
Sensor Assembly87
Adjusting the Sensor Height87
Amplifier88
Assembling the Fiber Unit to the Amplifier (F10R Amplifier)88
Setting the Switches on the Bad Mark Sensor Assembly (F10R Amplifier)89
Assembling and Setting the F70R Fiber Sensor Amplifier89
Manual Setting Method for the F70R Fiber Sensor Amplifier92
Replacing the HMS93
Replacing the HMS Head93
Replacing the Amplifier93
Sticking the Label94
Adjusting the HMS Height94
Replacing the Head Board95
Replacing the Head Main Board95
Occ Assembly97
Replacing the OCC Assembly97
Replacing the CCD Camera and Lens98
Replacing the OCC Front/Angle Light Board Assembly99
Replacing the Lens Filter100

Brand	JUKI
Model	KE-1070
Category	Industrial Equipment
Language	English

JUKI KE-1070 User Manual

Table of Contents

Questions and Answers:

JUKI KE-1070 Specifications

Related product manuals