JUKI KE-1070 User Manual

Maintenance Guide
1-28
1-8-4. Separating the Fusion-bonded Parts of the Cables
(1) Separate the fusion-bonded parts of the cables with a cutter so that the 40058384 and
40058385 cables can be bent to the Y-axis veyor-cables at an angle of 90 degrees.
Incise with a cutter. At this time, take care so that the sheath is not damaged.
Figure 1-8-4-1
Cables separated by a cutter
Figure 1-8-4-2

JUKI KE-1070 Specifications

General

Brand	JUKI
Model	KE-1070
Category	Industrial Equipment
Language	English