– 20 –
3-9. Installing the regulator and the manifold
1) Install manifold asm. on manifold mounting plate
❾ with four setscrews .
2) Install solenoid valve on manifold mounting
plate ❾ with two setscrews .
00 type 01 type
3) Install regulator asm. ❶ on
table ❷ with two setscrews
❸ and two washers ❹.
4) Install manifold ❺ on table ❷
with two setscrews ❻, four
washers ❼ and two nuts ❽.
5) Attach plugs and to manifold asm. at the
locations shown in the gure at left.
Table-xed type Semi-sunken type
Setscrews ❸ and ❻
are pan head screws
M5 of length 50 (mm).
Setscrews and are
hexagon socket head
screws M4 of length
30. Nuts ❽ are hexagon
nuts M5.
❷
❼
❽
❹
❸
❻
❼
❺
❶
❾
❷
❼
❽
❹
❸
❻
❼
❺
❶
Plug is for ø4 hole and plug is for ø6
hole.
To Next Page
Loading...
Need help?
General
