JUKI MEB-3810NJ User Manual

− 54 −
7-6. Setting the cut space
Clearance
7-7. Setting the eyelet space
Clearance
Clearance
❼
❻
Set the clearance where the knife drops in the parallel
section.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.
The space can be set –1.2 to 1.2 mm in the increments
of 0.1 mm.
Set the clearance where the knife drops in the eyelet
section.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.The space
can be set –1.2 to 1.2 mm in the increments of 0.1 mm.
❼
❻
❼
❻
–
7-8. Knife position compensation
Correct the slip between the position of knife and
sewing position.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.
Setting can be performed – 0.7 to 0.7 mm in the incre-
ments of 0.1 mm.
When the knife position in terms of the stitches is de-
sired to be placed in the rear side, set “+” (plus) value,
and in the front side, set “－” (minus) value.
+
–

JUKI MEB-3810NJ Specifications

General

Brand	JUKI
Model	MEB-3810NJ
Category	Sewing Machine
Language	English