JUKI MEB-3810NJ User Manual

− 59 −
Number of stitches
7-22. Setting the number of stitches of taper bar
7-23. Setting the offset of taper bar
7-21. Setting the length of taper bar
Offset amount
Set the number of stitches of taper bar.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.
The number of stitches can be set according to the
taper bar length using the range of stitch length from
0.5 to 4 mm.
Example) When the taper bar length is 6 mm, the
number of stitches can be set in the range
from two to 12.
Set the offset amount from the center of taper bar.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.
The offset amount can be set 0.5 mm to 2.0 mm in the
increments of 0.1 mm.
❼
❻
❼
❻
❼
❻
Set the length of taper bar.
Set the knife number by means of –/BACKWARD key
❻ or +/FORWARD key ❼.
The taper bar length can be set in increments of 1 mm
in the range from 3 to 15 mm.
Length
When the number of stitches is small, the
sewing speed is automatically reduced.

JUKI MEB-3810NJ Specifications

General

Brand	JUKI
Model	MEB-3810NJ
Category	Sewing Machine
Language	English