Jungheinrich ECE 220 User Manual

C 1
1206.GB
C Transport and Commissioning
1 Lifting by crane
F
Only use lifting gear with
sufficient capacity
(for transport weight see truck
data plate).
Z
Lifting gear attachment points
are provided on the chassis (1)
and the fork (2) in case the truck
is to be lifted or transported by
crane.
– Park the truck securely (see
Chapter E).
– Open the front panel and put it
to one side (see chapter F).
– Secure the lifting gear to the
attachment points (1) and (2).
M
The lifting gear must be
attached to the attachment
points in such a manner that it
cannot slip under any
circumstances and cannot come into contact with any attachments of the truck when
the truck is lifted.
2
1
C 1
1206.GB
C Transport and Commissioning
1 Lifting by crane
F
Only use lifting gear with
sufficient capacity
(for transport weight see truck
data plate).
Z
Lifting gear attachment points
are provided on the chassis (1)
and the fork (2) in case the truck
is to be lifted or transported by
crane.
– Park the truck securely (see
Chapter E).
– Open the front panel and put it
to one side (see chapter F).
– Secure the lifting gear to the
attachment points (1) and (2).
M
The lifting gear must be
attached to the attachment
points in such a manner that it
cannot slip under any
circumstances and cannot come into contact with any attachments of the truck when
the truck is lifted.
2
1

Jungheinrich ECE 220 Specifications

General

Brand	Jungheinrich
Model	ECE 220
Category	Forklifts
Language	English