E 13
1007.GB
Travel using the controller
– Set the controller (6) to the desired travel direction: forward (V) or reverse (R).
The truck moves at reduced speed (can be set up to a maximum of 4km/h).
Travel using the “pedestrian” button
– Press the “pedestrian” buttons (8, 10).
The truck travels at a fixed speed of approximately 2km/h (slow travel).
4.4 Lifting and depositing loads
M
Before raising a load, the driver must ensure that it is correctly palletised and that the
capacity of the truck is not exceeded.
– Enter the truck and the lift unit as far as possible underneath the load. Do not lift
long loads at an angle.
M
Lift the load, ensuring that it does not protrude excessively from the top of the lift
mechanism (less than (< 50 mm).
E 13
1007.GB
Travel using the controller
– Set the controller (6) to the desired travel direction: forward (V) or reverse (R).
The truck moves at reduced speed (can be set up to a maximum of 4km/h).
Travel using the “pedestrian” button
– Press the “pedestrian” buttons (8, 10).
The truck travels at a fixed speed of approximately 2km/h (slow travel).
4.4 Lifting and depositing loads
M
Before raising a load, the driver must ensure that it is correctly palletised and that the
capacity of the truck is not exceeded.
– Enter the truck and the lift unit as far as possible underneath the load. Do not lift
long loads at an angle.
M
Lift the load, ensuring that it does not protrude excessively from the top of the lift
mechanism (less than (< 50 mm).
To Next Page
Loading...
