To Next Page

To Previous Page

0708.GB

F 4

4 Maintenance checklist

Maintenance Intervals

Standard = t WA B C

Cold store = k

Brake 1.1 Check magnetic brake air gap t

Electrics 2.1 Test of instruments, displays and control switches t

2.2 Test warning and safety device. kt

2.3 Check fuse ratings. t

2.4 Make sure wire connections are secure and check for

damage.

2.5 Test micro switch setting t

2.6 Check contactors and relays. t

2.7 Safety switch t

2.8 Wire and motor attachment t

2.9 Check carbon brush wear, replace if necessary kt

Power

supply

3.1 Visually inspect battery. kt

3.2 Check battery cable connections are secure, grease

terminals if necessary.

3.3 Check acid density, acid level and battery voltage kt

Travel 4.1 Check transmission for noise and leakage t

4.2 Replace gear oil if service life exceeded (10,000 hours)

4.3 Test travel mechanisms, adjust and lubricate if necessary,

carry out tiller recuperation test.

4.4 Check wheels for wear and damage kt

4.5 Check wheel suspension and attachment. t

Truck

structure

5.1 Test the operator platform and check for damage t

5.2 Check chassis for damage. t

5.3 Check labels. t